Brief information
9.5Ti winch made by WARN (USA). This winch is equipped with a Gen II Series Wound electric motor.
The winch has a 3-stage planetary gear and full-surface drum seals, electric motor and housing end gaskets to prevent water ingress in extreme conditions. The winch remote control is equipped with a temperature indicator that provides information about the temperature of the electric motor during winch operation.
Winch 9.5Ti
Specifications:
- WARN Part Number: 66260 (12V)
- Rated linear pulling force: 4310 kg (9500 pounds) with one cable
- Intended use/application: vehicle recovery
- Engine: Gen II Series Wound
- Remote control: remote switch, 12 feet wire (3.7 m)
- Gear reducer: 3-stage planetary, gear ratio: 156:1
- Lubrication: 76 Moly low temperature grease
- Coupling (free rotation): sliding ring gear
- Brake: automatic direct bevel gear
- Wire rope: 125 feet long (38 m), diameter 5/16 inches (8 mm)
- Stacker: roller
- Manufacturer approved battery: 650A minimum cold cranking current
- Battery Leads: Gauge 2 (AWG), length 100 inches (2.54 m)
- Finish: dark gray high gloss powder coating
- Drum Diameter/Length: 6.4cm/23cm (2.5/9.0 inch)
- Weight: 36.3 kg (89 pounds).
Performance Specifications (12 VDC current)
| Linear pulling force in pounds (kg) | Winding speed ft/min. (m/min.) | Motor current | Wrapping Force: Layer/lb (kg) |
| 0 | 62 (18,9) | 47 amps | 1/9500 (4313) |
| 2000 (910) | 16,3 (4,97) | 160 amps | 2/8650 (3927) |
| 4000 (1814) | 11,8 (3,60) | 230 amp | 3/7920 (3595) |
| 6000 (2720) | 9,31 (2,84) | 305 amp | 4/7400 (3359) |
| 8000 (3630) | 7,59 (2,31) | 370 amps | 5/6940 (3150) |
| 9500 (4310) | 6,67 (2,03) | 425 amps | - |
The above performance data is correct for the first layer of rope on the drum.
Comments on this article