Tire codes
The text, codes, and numbers on the sidewall of a tire vary by manufacturer, but most tires are labeled with the information shown in the picture.
NOTE: The illustration is an example of the markings given on the tire and is for reference only. For information on specific tire specifications.
For more information, please refer to the chapter: Specifications (204-04 Wheels and tires, Specifications).
| Pos. | spare part no | Name |
| 1. | - | Tire construction type - Radial Ply (Radial) |
| 2. | - | Load index - 104 |
| 3. | - | Speed symbol - S or T |
| 4. | - | Tire quality class, USA - Tread wear 160 Traction A temperature B (Tread wear 160 Clutch A temperature B) |
| 5. | - | Tread wear indicators molded into the tread pattern are located at regular intervals around the circumference of the tire and are marked with the code E66 103S6 |
| 6. | - | Tire tread type «mud / snow» are marked M and S |
| 7. | - | Tire reinforcement marking - Reinforced (reinforced) |
| 8. | - | Load and pressure specification, USA - (900Kg (1984LBS) at 340KA (50PSI) MACS PRESS (900 kg (1984 pounds) at a maximum pressure of 340 kPa (50PSI)) |
| 9. | - | Tire size - 205 16 or 235/70 R16 |
| 10. | - | Tire type - TUBELESS (TUBELESS) |
| 11. | - | Country of manufacture - MADE IN GREAT BRITAIN (MADE IN THE UK) |
| 12. | - | Compliance symbol and identification, USA - DOT AB7C DOFF 267 |
| 13. | - | European type approval identification - E11 01234 |
| 14. | - | Tire construction - SIDE WALL 2 PLIES RAYON. TREAD 2 RAYON 2 STEEL |
| 15. | - | Manufacturer brand/type - TRACTION PLUS mzx M |
WARNING: This is a versatile vehicle with wheels and tires designed for both on- and off-road use. Use only wheels and tires specified for use on the vehicle.
As standard, the vehicle is fitted with 'S', 'T' or 'H' class tubeless radial tires. Tires are European metric size and should not be confused with metric tires "P", available in North America.
All wheels of the vehicle, including the spare wheel, must be fitted with tires of the same brand and type, with the correct specification and tread pattern. Under no circumstances should diagonal or diagonal belt tires be used.
WARNING: DO NOT install an inner tube on an alloy wheel.
For information on tire specifications and pressures.
For more information, please refer to the chapter: Specifications (204-04 Wheels and tires, Specifications).
Wheels with steel rims
Steel wheels with a width of 5.5 or 6.5 inches and a diameter of 16 inches are equipped with tubeless tires.
Wheels with alloy wheels
The cast aluminum alloy wheels are 7.0 inches wide and 16 inches in diameter and are fitted with tubeless tires. The surface is painted with a transparent layer of polyurethane varnish. Be careful when handling the wheel to avoid scratching or otherwise damaging the finish. The wheel rim with light-alloy rim has an asymmetric safety ring on the landing shelf, which improves the fit of the tire bead on the wheel. If you have difficulty installing tires on this type of rim. Cm.
For more information, see the chapter: Wheel and tire (204-04 Wheels and tires, Removal and installation).
Comments on this article