Lockable body parts Land Rover Defender 90/110/130

Description and principle of operation
Front seat tilt The front seat slope has been improved by removing the bulkhead located behind the front seats. This allows the front seats to tilt more than on the previous Defender 90. This change...

Tailgate Stop Adjustment
General procedures 1. NOTE: Before adjusting the rear door striker, make sure the spare wheel is installed on the rear door. Loosen the screws securing the counterpart of the rear door lock. 2....

Reconciliation of the counter part of the door lock
General procedures NOTE: This procedure describes counter lock adjustments on the front and rear doors. 1. Loosen the Torx bolts used to secure the striker to the B-pillar or C-pillar. 2. Adjust the...

Door — removal and installation
Removing 1. Turn away a nut of fastening of the limiter of opening of a door. 2. With the help of another mechanic, remove the four bolts securing the door to the body and remove the door....

Tailgate — removal and installation
Removing 1. Turn away three nuts and remove a spare wheel. 2. Turn out a bolt of fastening of the limiter of opening of a door to a body. 3. Release the wiring harness grommet from the wiring harness...

Rear door amplifier panel — removal and installation
Removing 1. Remove the rear door trim panel. For more information, refer to the chapter: Tailgate Trim Panel (501-05 Interior trim, Removal and installation). 2. Remove the plastic cover from the...

Front door amplifier panel — removal and installation
Removing 1. Remove the door trim panel and plastic cover. For more information, see chapter: Front door trim panel (501-05 Interior trim, Removal and installation). 2. Remove the plastic cover. 3....